Butler CanAm Spyder Driver Set for RT and ST

 

The Butler CanAm Spyder Driver Set is specifically designed to be used on the CanAm Spyder RT and ST series. Spyder riders have been waiting for years for this and it is finally here and was well worth the wait. As with all Butlers, these can be purchased with either the 20 oz mug or the 34 oz mug. Please see Installation for mounting instructions.

Note – For the Can Am Spyder F3 or the Can Am Spyder RS you should order the Butler Python Driver Set.

Type A
Type A includes the Butler Mug, Ring and all the bracketing necessary to use the Butler mug only.

Type B
Type B is a Type A plus the Butler Knuckle. The Butler Knuckle is a device that allows for the articulated mounting of an additional device such as GPS, camera, cell phone holder, etc.

 

Butler Spyder Type B

Type C – 3 inch extension
Type C is a Type B with a 3 inch extension rod and additional Butler Knuckle. This type extends the articulated mounting point. This rod attaches to the primary Butler Spyder handlebar bracket with a Butler Knuckle and includes another Butler Knuckle at the far end of the extension rod. A Butler Knuckle is a 2 inch device, so the use of a Type C bracket allows for an articulated extension of an additional device by a total of 7 inches using the 3 inch rod. These extensions are measured from the primary handlebar bracket.

Type D – 4 inch extension
Type D is a Type B with a 4 inch extension rod and additional Butler Knuckle. This type extends the articulated mounting point. This rod attaches to the primary Butler Spyder handlebar bracket with a Butler Knuckle and includes another Butler Knuckle at the far end of the extension rod. A Butler Knuckle is a 2 inch device, so the use of a Type D bracket allows for an articulated extension of an additional device by a total of 8 inches using the 4 inch rod. These extensions are measured from the primary handlebar bracket.

Type E – 6 inch extension
Type E is a Type B with a 6 inch extension rod and additional Butler Knuckle. This type extends the articulated mounting point. This rod attaches to the primary Butler Spyder handlebar bracket with a Butler Knuckle and includes another Butler Knuckle at the far end of the extension rod. A Butler Knuckle is a 2 inch device, so the use of a Type E bracket allows for an articulated extension of an additional device by a total of 10 inches using the 6 inch rod. These extensions are measured from the primary handlebar bracket.

If you need a Butler Passenger Set for the Spyder RT or ST, click here to go to the Passenger Set Order Page.

Note – For the Can Am Spyder F3 or the Can Am Spyder RS you should order the Butler Python Driver Set.

Butler Spyder Type E

Type A – $88.00
Type B – $120.00
Type C,D,E – $136.00
Clear
This field can't be Empty
SKU: N/A Category:

Other

Motorcycle

Driver Sets

The Butler Standard Driver Set is the original handlebar unit. It is designed to mount on either the left or right side using the two-bolt factory saddle clamp (with longer bolts supplied). This design is made to fit on most bikes such as Hondas, Harleys, Yamahas, Suzuki’s and many more.

The Butler Python Driver Set is the best choice For Harley’s, Victory’s and other cruisers. It is a newer development and will do everything that the Butler Standard Driver Set will and more. It is compact and very strong. It is machined aluminum that is powder coated either in Gloss Black or Bengal Silver.

After a long wait, the Butler BMW K1200LT Driver Set is now ready! This is the best, most solid, and long-lasting mounting method and this mounting method places the Butler in the right place.

The Extreme Mug Holding System

Order your Butler through our online factory store today and we will get it shipped out to you right away. If you have any questions or prefer to order over the phone, give us a call.

GLASS ACT

Manufacturer of the
Butler Mug Holding System

336 County Rd. 3795
Lampasas, TX 76550
(512) 768-3908 (Phone)

Email: butler@glassact.com