Butler Parts & Accessories

Butler Parts & Accessories are availlable for the Butler Mug Holding System. Please contact us if you don’t see what you need or if you have any questions.

The Butler system (including all Butler Motorcycle Mug Holders) can now be used with the popular 30 ounce stainless steel tumblers made by YETI and Ozark Trail. The 20 ounce ‘Original Butler Lid’ setup with straw and straw caps is designed to fit perfectly on these 30 ounce tumblers. These stainless steel tumblers fit perfectly in the standard Butler 20 ounce Compression Ring. You can order just the Butler Extreme Handle or the Butler Metal Tumbler Kit that includes the Butler Extreme Handle, a 20 oz. Butler Extreme Lid, the straw and two straw vent caps. You can find these Butler Parts & Accessories here.

There are many drink holders on the market but none like the patented Butler Mug Holding System. The Butler Mug Holding System is the most popular choice for motorcycle riders. The unique patented design was developed in the early 90’s by Glass Act, a Texas company that specializes in precision machining work.

Hybrid P-Shaped Mounting Bracket

If you already have a Standard Driver Butler and want to use this Butler on the 2018 or later Goldwing, then all you need to purchase is this “P” shaped driver mounting bracket.

Butler Conversion Kits

Once you have a Butler Set installed, this kits allows you to switch from one size Butler to the other. You can carry a small coffee in the morning and a big cold drink in the hot afternoon. One of our most popular Butler Parts & Accessories.

Conversion Kit for CanAm Spyder

Once you have a Butler Set installed, this kits allows you to switch from one size Butler to the other. You can carry a small coffee in the morning and a big cold drink in the hot afternoon.

Butler Compression Rings

Includes the 20 oz. or 34 oz. Compression Ring with bolt and knob. This kit does not include the mounting bracket, mug or lids. One of our most popular Butler Parts & Accessories.

Butler Extreme Mugs

This is a replacement mug or an additional mug for your Butler set. It does not include any of the mounting parts or the compression ring.

Butler Extreme Lids - Single Lid

These are individual replacement Butler Extreme Lids. You can order a single small 20 oz lid or a single large 34 oz lid. The lid comes with a Seal-Fit Straw and two (2) Straw Vent Caps.

Butler Extreme Lids - Six Pack

Six-pack of replacement Butler Extreme Lids. You can order a six-pack of small 20 oz lids, a six-pack of large 34 oz lids or a mixed six-pack that includes three of each.

Butler Extreme Handle

Butler Extreme Handle fits the popular 30 ounce stainless steel tumblers made by YETI and Ozark Trail which will fit the Butler 20 oz. Compression Ring. One of our most popular Butler Parts & Accessories.

Butler Metal Tumbler Kit

Fits the popular 30 ounce stainless steel tumblers made by YETI and Ozark Trail. Includes the Butler Extreme Handle, 20 oz. Compression Ring, straw and two vent caps. One of our most popular Butler Parts & Accessories.

Butler Parts & Accessories

one of the best investments you can put on your bike

The Butler is one of the best investments you can put on your bike. I’ve had mine since 2001 and it’s been on 3 bikes now. I wouldn’t use any other kind of cup on my bike. It stays right where I put it and is still easy to remove; my drinks stay cool all day.

Don Watson, MI

We love the convenience

We have used the Butler since 2001. We love the convenience of having a cold drink on hot days and not having to worry about loosing the cup, because the holder is perfect.

Kim & Karen Ruzicka, CO

When I ride, my Butler is with me

When I ride, my Butler is with me. It’s as advertised. Service is great. I highly recommend the product.

Wes Edens, Johnson City, TN

Great service from great people

I bought my Butler in 1999 and have had excellent service from it. I have had a Butler on my last 3 GoldWings and really like it. I have purchased extra mugs for both my wife’s and mine. Great service from great people.

Pat Hasiak, Dale City, VA

works great

I have used the Butler for over five years. It is great and works great. It keeps cool drinks cold and hot drinks hot. I know that when I reach for my cup it is always right there ready to be drank from.

Gwen Hart & Tom Hart, TX

I love it and would not ride without it

Mike and Rita are awesome and the Butler speaks for itself. I love it and would not ride without it, summer or not – all my riding buddies are convinced – you will not be disappointed.

Peach & Fuzz, VA

Would certainly buy them again

Had the large front and rear. Works great 2 years now. Would certainly buy them again!

David D., Knoxville, TN

They work better than any other mug or cup holder on the market

We purchased both a driver set and a passenger set for our GoldWing. We love them. They work better than any other mug or cup holder on the market. They look great too. Other riders are always asking where we got them. I’m so glad that you have the online store and friends don’y have to wait for a rally to buy them.

Steve & Nancy Green, TX

the best thing that I have ever had installed

The Butler motorcycle mug holder is the best thing that I have ever had installed on my GoldWing. I highly recommend this product for anybody who rides. Thanks.

Cassie Willman, NC

An absolute ‘must’ for driving around in this 104 to 110 degree heat

I bought a large Butler cup and holder for my 2006 Gold Wing and I love it. I did what you suggested about putting about a foot or so of 3/8 inch clear tubing on the end of the straw so I can use it with my full face helmet. It works perfectly! An absolute ‘must’ for driving around in this 104 to 110 degree heat. After four hours on one of my trips the cup still had ice cubes in it!

Larry Ruiz

Every time we get the GoldWing out, our Butlers go with us

We bought our Butlers in 2000 and love them. We have owned several other brands of mugs and holders and got rid of all of them for various reasons. Every time we get the GoldWing out, our Butlers go with us. The greatest part is even when your mug is empty, the mug won’t blow out of the holder.

Gary & Sharon Fisher, KS

The Butler is great

The Butler is great. Once I dropped mine. When I went back for it, it was still in great shape.

Walt Nestor

They can’t be beat

I bought a Butler in 2004 for my GL1800. I had never had a holder before. I thought it worked great but did not have anything to compare it to. After an accident on the bike my Butler was destroyed. When I bought my new GL1800 (2005), I purchased one of those fold-up compact drink holders. Now, I know the difference. The fold up holder just does not hold drinks without letting them fall. Six months later I could not take it anymore and purchased another Butler.They can’t be beat.

Dee Herron, Baton Rouge, LA

I wouldn’t leave without it

I purchased the Butler for my ’94 Wing and then transferred it to the ’03. I wouldn’t leave without it. Great product. Thanks.

J. Moore, Lenoir City, TN

very pleased

We have had Butlers since 1998. We ride a Cavalcade with a few others and all of us have them. The ice lasts a while, and they never blow off. We upgraded to the newer ones and are very pleased. Good Job.

Jeff & Jenny Nestor

A great product that will last

I have used the Butler over thousands of riding miles. A great product that will last! I would recommend this product to every motorcycle rider.

J. Edens, Gray, TN

I’ve never taken it off

I bought my Butler in 2003. I’ve never taken it off. If I don’t have pop or coffee or water in it, I put sunglasses or cell phone in it to keep things handy.

Mick McCoy, Marysville, OH

The Butler has worked perfectly

The Butler has worked perfectly for my co-rider and me. It keeps cold beverages cold and hot beverages hot for hours.

Marty Leake, Prince William Co, VA

very best mug to use on the road

The very best mug to use on the road. I’ve bought both sizes and use the large one on the bike and the small one in the car. The Vines (Mike & Rita) really stand behind their mugs and give excellent customer service and satisfaction.

Tandy Collins, TN

Would not go anywhere without them

We love our Butlers and use them for cold drinks and coffee in the morning. Would not go anywhere without them.

Cordell & Pat Tolliver, Middlesboro, KY

The Extreme Mug Holding System

Order your Butler through our online factory store today and we will get it shipped out to you right away. If you have any questions or prefer to order over the phone, give us a call.

GLASS ACT

Manufacturer of the
Butler Mug Holding System

336 County Rd. 3795
Lampasas, TX 76550
(512) 768-3908 (Phone)

Email: butler@glassact.com

Custom Website Design by WizardsWebs Design